- Remove antennas from TrueD
- Place your VTX set on 25mW 30cm away from the TrueD(1 meter for 200mW)
- Go into the TrueD menu>Settings>Calibrate
- Wait till calibration says succesful
- Select your channel and calibration will be complete
How to calibrate the TrueD Print
Created by: FuriousFPV .
Modified on: Sun, 26 Aug, 2018 at 10:56 AM
Did you find it helpful? Yes No
Send feedbackSorry we couldn't be helpful. Help us improve this article with your feedback.