Here you can find the user manual for the F35 Lighting flight controller
Sat, 19 Jan, 2019 at 10:54 AM
You can wire up PPM on the spare signal available next to the camera signal. In INAV Configuration tab, change the RX input to PPM.
Thu, 30 Aug, 2018 at 6:38 AM
In EZGUi, you need to ensure that you select HM-10 as the bluetooth module. If that is already yet, check that the baudrate of MSP port 1 is set to 57600.
Sun, 9 Sep, 2018 at 2:26 PM
The best way to find the issue causing the aircraft not to arm is to check the status page. If there is a cross, you will need to fix it, for example, "...
Sun, 9 Sep, 2018 at 2:30 PM
Thu, 13 Sep, 2018 at 10:21 AM
Use this on your own risk, RTH will not work, but you can fly without any gps sats Go to CLI and past this set fixed_wing_auto_arm=on set inav_res...
Wed, 26 Sep, 2018 at 10:58 AM
Open the red cover, then you can see 2 small bridges, connect this together with a tweezer.
Mon, 8 Apr, 2019 at 9:48 AM
See the picture for the 2 pins to bridge
Mon, 22 Jun, 2020 at 10:54 AM
Here is the attachment with all information how to connect the dji air unit to the F35
Wed, 19 Aug, 2020 at 12:02 PM